what it does today
the inventory, updated with the app: if it is listed, it works now.
operations
- profile: outside, inside or on the line, with holding tabs
- pocket: clears the inside, respecting islands
- drill: holes at marks, straight down
- v-carve: depth computed from the shape's width and the bit's angle, stroke by stroke
drawing
- svg and dxf import, arcs included
- layers: hide, show and pick per operation
- strokes are real ink: a stroke cuts as a band the width you drew it, not as a hairline
machine & tools
- machine library: bed, rapids, collet; limits checked on every cut
- tool library: flat, ball, vee and drill bits, in your units
- setups and materials: stock, datum and spoilboard, reused across jobs
- g-code export: grbl and mach3 posts, ready to run
seeing the cut
- 3d viewport: the real toolpaths over the real stock
- machine-time playback: every rapid, plunge and pass, at the feeds it will run
- depth as colour: the deeper the cut, the hotter the line
- field guide: every setting explained where you use it
projects
- saves itself: every change is a step in the project's history
- undo that survives: walk back through real saved states, even after a reload
- versions: tag the states worth keeping